Configure CL over Fiber
Last modified by Michael Videlgauz on 2026/08/27 16:31
Vision Point API implements Serial Port interface for FXCL system:
1. Make sure to set correct baud rate in CameraLink to Fiber Extender located in Vision Point under Camera tab -> Device Control -> DeviceSerialPortSelector("CameraLink") ->
DeviceSerialPortBaudRate
KYFG_SetCameraValueEnum_ByValueName(camHandle, "DeviceSerialPortSelector", "CameraLink");
KYFG_SetCameraValueEnum_ByValueName(camHandle, "DeviceSerialPortBaudRate", "Baud115200");
KYFG_SetCameraValueEnum_ByValueName(camHandle, "DeviceSerialPortBaudRate", "Baud115200");
2. More information about how to work with camera's serial port via KAYA serial API available at clserkyi – serial port API Data Book
3. It is possible to access camera's serial port from Vision Point GUI. In this case, a virtual COM port will be created using '==clSerialComPortInitEx()==' function from KAYA's serial API. Connection to COM port can be achieved using standard serial terminal (e.g Tera Term).